CNC slotting machine is mainly used for slotting operation in the treatment of cracks on asphalt and cement pavement. The irregular crack is arranged into a uniform groove by 6 special blades, forming a new slit. Optimize the contact layer between the filling material and the groove, and strengthen the tightness between the filling material and the side wall of the slot. In order to better use the CNC slotting machine, let's first understand the operation precautions of the CNC slotting machine.
1. Before the machine is started, you must carefully check whether the cutting tools, nuts and screws are reliable. If looseness is found, it must be tightened in time.
2. Pay attention to the cutting direction when installing the tool and do not reverse it.
3. Turn the main tool clockwise.
4. Before opening the feed, make sure that the pneumatic device opens and compacts the workpiece on the movable pusher and positioning plate, and does not allow the hand to approach the blade.
5. When the machine tool fails, the power should be cut off, the operation should be stopped, and a special person should be sent to repair and adjust.
Sixth, before processing, the material should check whether there are iron nails, sand and stone joints on the tool.
7. Machine tool cleaning, lubricating oil cleaning, saw blades and blade fragments must be cut off from the power supply of the machine tool.
8. The machine tool should be operated, adjusted and maintained by corresponding personnel. It is strictly forbidden to use it for those who are not familiar with the machine tool.
Nine, workers should wear earplugs, glasses and other supplies.
10. The maintenance of the machine shall be carried out in accordance with the "equipment operation, maintenance and maintenance system".