能根据施工需要通过一次切割操作即可切割出不同角度、宽度和深度的线槽，线槽一次成型，无需要其他辅助工具，能大大提高工作效率，且对墙体扰动较小。 The one-time slotting machine can cut wire grooves with different angles, widths and depths through one cutting operation according to the needs of the construction. The wire grooves are formed at one time without the need for other auxiliary tools, which can greatly improve the work efficiency and reduce wall disturbance. small. The garbage generated by the cutting is granular, and the equipment has a water spray device, which can greatly reduce the dust in the grooving operation, thereby protecting the personal health of the operator and reducing environmental pollution. This tool is suitable for cutting red brick, aerated block, granite, marble, concrete and other materials. The following describes its use and purchase points.
The slotting machine can be operated by an operator. First, connect the slotting machine to a 220V power supply, and adjust the blade according to the width, depth and angle of the slot to be cut.
Turn on the power, check whether the cutting machine is operating normally, and then slowly push the slotting machine to cut the wall. The wire groove is formed at one time without any auxiliary tools and without the second process;
Slots of different angles can be rotated and cut freely. When pushing the slotting machine to cut the wall, the self-contained water spray device sprays water synchronously with the cutting operation, which can greatly reduce the dust in the slotting operation.
This slotting machine can slot on average 1 ~ 2m per minute, with a maximum cutting width of 3cm and a depth of 4cm.
If the width of the groove is larger than the width of a single cut, you can cut again at the edge of the cut groove to widen the width of the groove.
Key points for purchasing one-time slotting machine:
1. What company is selling this product? (A regular company, or a copycat machine copied by a small workshop).
2. How about the company's reputation? Is there a warranty for the slotting machine? What is the warranty period?
3. At some point in the future, when there is a problem with the machine, or if you need a new accessory, can they guarantee to supply it at any time to help you solve the problem?
4. Is the seller an expert, or is this a one-off deal? Whether this seller can still exist in the future and whether you can still contact them.
5. It is important to understand the differences between manufacturers and some typical vendors.
Some traffickers only care about buying and selling, and after the transaction is completed, the customer is ignored and only the immediate benefits are seen. Manufacturers value their reputation and brand, and they will protect their brand at all costs.
Manufacturers tend to do long-term business, so they promise to provide a variety of service support to running machines, whether new or old.
The manufacturer knows that if a customer buys a machine with good performance, then he will recognize the brand, and the next time he buys the machine, he will give priority to the machine of this brand.
The above is Xiaobian's introduction to the use and selection of one-time slotting machine. Hydropower installation is an important part of building real estate decoration, and decoration slotting is an essential project in the decoration industry;
Nowadays, a molding slotting machine saves a lot of things for decoration workers. I hope the above can help everyone.
If you need, you can call us directly.