Laser cutting machine affects some factors of life. For the laser cutting machine, the life of the pump source and the crystal that affect the life is actually the life of the lamp. Generally the life of standard lamps, the life of crystals. When the energy decreases, the processing performance of the laser cutting machine will be greatly reduced, so the only solution is to replace the pump source and crystal.
When the laser cutting machine cuts the material, a large amount of gas and splashes will be released on the working surface, and these gases and splashes will cause damage to the lens. When contaminants fall on the lens surface, they will absorb energy from the laser beam, resulting in a thermal lens effect. If the lens has not developed thermal stress, the operator can remove and clean it.
The laser cutting machine's power suddenly drops, and the glass tube may break. There are watermark marks on the wall of the cracked glass tube. You can increase the power of the air conditioner and the air dryer to reduce the humidity of the air; when the high temperature is high, it may cause the glass to crack. No dirt and residual traces remain on the mirror surface; blow dry with dry air; if necessary, roll the lens paper wet with a few drops of ** into a rod, and gently scrub the lens surface to remove heavy dirt drops.